Filter :
Standard and/or project under the direct responsibility of ISO/TC 61/SC 11 Secretariat Stage ICS
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
95.99
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 2
95.99
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
90.93
Plastics — Determination of tensile properties of films
95.99
Plastics — Industrial laminated sheets based on thermosetting resins — Specification
95.99
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
95.99
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
90.93
Plastics — Decorative laminated sheets based on thermosetting resins — Part 1: Specification
95.99
Decorative high-pressure laminates (HPL) — Sheets based on thermosetting resins — Part 1: Specification
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications — Amendment 3: Lightfastness
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 1: Introduction and general information
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 1: Introduction and general information
90.93
Plastics — Decorative laminated sheets based on thermosetting resins — Part 2: Determination of properties
95.99
Decorative high-pressure laminates (HPL) — Sheets based on thermosetting resins — Part 2: Determination of properties
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 3: Lightfastness
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 4: Resistance to surface wear
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 5: Resistance to scratching
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 6: Resistance to wet heat
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 7: Stain resistance and cleanability
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 8: Dimensional stability
95.99
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 2: Determination of properties
90.93
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
90.93
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
90.93
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
90.93
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
90.93
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifications for design laminates
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 7: Classification and specifications for design laminates
90.93
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates
95.99
High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 8: Classification and specifications for alternative core laminates
90.93
Adhesives — Determination of tensile lap-shear strength of high strength adhesive bonds
95.99
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
95.99
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
90.93
Adhesives — Preparation of metal surfaces for adhesive bonding
95.99
Adhesives — Guidelines for the surface preparation of metals
95.99
Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
95.99
Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
90.93
Plastics — Film and sheeting — Determination of length and width
95.99
Plastics — Film and sheeting — Determination of length and width
90.93
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
95.99
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
90.93
Guide for the analysis of differences between various standards of fibre reinforced plastic-working towers made of prefabricated elements
30.60
Plastics — Joining of thermoplastic moulded components — Specification for quality levels for imperfections
60.60
Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products
90.92
Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products
40.00
Adhesives — Installation of floor coverings, wood flooring, levelling compounds and tiles — Specification of trowel notch sizes
60.60
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
95.99
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
95.99
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
90.93
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compression loading
95.99
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading
95.99
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading
90.93
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
95.99
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
90.93
Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf method
90.93
Adhesives — Determination of tensile strength of butt joints
95.99
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 1: Staircase methods
90.93
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
95.99
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
90.92
Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test
40.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
95.99
Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
90.93
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets — Technical Corrigendum 1
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
90.93
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
95.99
Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets
60.60
Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
60.60
Plastics — Film and sheeting — Determination of the coefficients of friction
95.99
Plastics — Film and sheeting — Determination of the coefficients of friction
90.93
Plastics — Film and sheeting — Determination of wetting tension
95.99
Plastics — Film and sheeting — Determination of wetting tension — Technical Corrigendum 1
95.99
Plastics — Film and sheeting — Determination of wetting tension
90.93
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 1: 90 degree peel
95.99
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel
95.99
Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180° peel
90.93
Plastics — Film and sheeting - Determination of cold-crack temperature
90.93
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
95.99
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints — Technical Corrigendum 1
95.99
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
90.93
Adhesives — Test method for shear impact strength of adhesive bonds
95.99
Adhesives — Test method for shear impact strength of adhesive bonds
90.93
Adhesives — Test methods for fatigue properties of structural adhesives in tensile shear
90.93
Adhesives — Animal glues — Methods for sampling and testing
95.99
Adhesives — Animal glues — Methods of sampling and testing
90.93
Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
95.99
Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
90.93
Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test
90.93
Hot-melt adhesives — Determination of thermal stability
90.93
Adhesives — Determination of working life (pot life) of multi-component adhesives
95.99
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
95.99
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
95.99
Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
60.60
Adhesives — Designation of main failure patterns
95.99
Adhesives — Designation of main failure patterns
60.60
Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners
90.93
Adhesives — Determination of shear behaviour of structural bonds — Part 1: Torsion test method using butt-bonded hollow cylinders
95.99
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders
95.99
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders
90.93
Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method
95.99
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
95.99
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
90.93
Adhesives — 180 degree peel test for flexible-to-flexible bonded assemblies (T-peel test)
95.99
Adhesives — T-peel test for flexible-to-flexible bonded assemblies
95.99
Adhesives — T-peel test for flexible-to-flexible bonded assemblies
95.99
Adhesives — T-peel test for flexible-to-flexible bonded assemblies
60.60
Adhesives — Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions — Wedge impact method
95.99
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method
95.99
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions — Wedge impact method
90.93
Plastics — Film and sheeting — Determination of dimensional change on heating
90.93
Plastics — Film and sheeting — Determination of blocking resistance
95.99
Plastics — Film and sheeting — Determination of blocking resistance
90.93
Fibre reinforced plastics — Telescopic ladder — Requirements and test methods
60.60
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
95.99
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
95.99
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
95.99
Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm
90.20
Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm
90.93
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
95.99
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
95.99
Plastics — Polycarbonate sheets — Types, dimensions and characteristics
90.20
Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
95.99
Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods
60.60
Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs
90.20
Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
95.99
Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
90.93
Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
90.93
High-pressure decorative laminates — Composite elements — Part 1: Test methods
90.93
High-pressure decorative laminates — Composite elements — Part 2: Specifications for composite elements with wood-based substrates for interior use
90.93
Adhesives — Guidelines for the surface preparation of plastics
95.99
Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load
90.93
Plastics — Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures — Determination of shrinkage stress and contraction stress
90.93
Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods
95.99
Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods
60.60
Extruded sheets of polyethylene (PE-HD) — Requirements and test methods
95.99
Extruded sheets of polyethylene (PE-HD) — Requirements and test methods
60.60
Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method
90.93
Adhesives — Determination of resistance to flow (sagging)
90.93
Adhesives — Measurement of adhesion characteristics by a three-point bending method
90.93
Extruded sheets of polypropylene (PP) — Requirements and test methods
95.99
Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
95.99
Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods
60.60
Plastics — Extruded sheets of poly(vinylidene fluoride) (PVDF) — Requirements and test methods
90.93
Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods
95.99
Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods
90.93
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method
95.99
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure methods
90.93
Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 1: Humidity detection sensor method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2: Infrared detection sensor method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 4: Gas-chromatographic detection sensor method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 5: Pressure sensor method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 6: Atmospheric pressure ionization mass spectrometer method
90.93
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 7: Calcium corrosion method
90.93
Adhesives — Determination of cleavage strength of bonded joints
90.93
Adhesives — Determination of strength of bonded joints using a bending-shear method
90.93
Adhesives — Determination of the time to rupture of bonded joints under static load
90.93
Adhesives — Methods of preparing bulk specimens — Part 1: Two-part systems
90.93
Adhesives — Methods of preparing bulk specimens — Part 2: Elevated-temperature-curing one-part systems
90.93
Adhesives — Determination of the bond strength of engineering-plastic joints
95.99
Adhesives — Determination of the bond strength of engineering-plastic joints
90.93
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
95.99
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
95.99
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
95.99
Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
60.60
Adhesives — Sampling
90.93
Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films
90.93
Plastics — Film and sheeting — Biaxially oriented poly(ethylene terephthalate) (PET) films
90.93
Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films
90.93
Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films — Technical Corrigendum 1
60.60
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 3: Determination of heat-transfer properties
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 5: Determination of shear fatigue
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 6: Determination of pendulum-type shear impact
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 7: Environmental test methods
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 8: Electrochemical-migration test methods
90.20
Adhesives — Test methods for isotropic electrically conductive adhesives — Part 9: Determination of high-speed signal-transmission characteristics
90.20
Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
90.93
Specifications for adhesives used for finger joints in non-structural lumber products
90.93
Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements
90.93
Structural adhesives — A standard database of properties
95.99
Structural adhesives — Standard database of properties
60.60
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
95.99
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
90.93
Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films
95.99
Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films
60.60
Plastics — Film and sheeting — Cast polypropylene (PP) films
90.93
Specification of polypropylene drinking straws
90.93
Specification for Thermoplastic Water Meter Cabinet
30.00
Plastic Scaffold Planks Performance and General Design Requirements
30.00
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 1: Guidelines for the approach
90.93
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 2: Test specimens
90.93
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods
90.93
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 4: Environmental conditions for durability
90.93
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 5: Fracture energy
60.60
Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 6: Accelerated degradation test
60.60
Adhesives — Classification of thermoplastic wood adhesives for non-structural applications
90.93
Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints
90.93
Adhesives — Determination of temperature dependence of shear strength
90.93
Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
90.93
Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 2: Specifications
90.93
Plastics — Decorative solid surfacing materials — Part 1: Classification and specifications
90.93
Plastics — Decorative solid surfacing materials — Part 2: Determination of properties — Sheet goods
90.93
Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
95.99
Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
60.60
Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards
90.93
Plastics moulded parts — Tolerances and acceptance conditions
90.92
Plastics moulded parts — Tolerances and acceptance conditions
30.20
Plastics — Wood-plastic recycled composites (WPRC) — Part 1: Specification
60.60
Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods
60.60
Plastics — Wood-plastic recycled composites (WPRC) — Specification
95.99
Adhesives — Guideline for separating adhesively bonded joints enabling repair and improving recycling
20.60
Elastic adhesives — Testing of adhesively bonded joints — Bead peel test
90.20
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
95.99
Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
60.60
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods
90.93
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal methods
90.93
Adhesives — Test methods for adhesives for floor and wall coverings — Peel test
90.20
Adhesives — Test methods for adhesives for floor and wall coverings — Shear test
90.20
Adhesives — Test methods for adhesives for floor coverings and wall coverings — Determination of the dimensional changes of a linoleum floor covering in contact with an adhesive
90.20
Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determination of dimensional changes after accelerated ageing
90.20
Adhesives — Adhesives for floor coverings — Requirements for mechanical and electrical performance
60.60
Adhesives — Test of adhesive for floor covering — Determination of the electrical resistance of adhesive films and composites
90.20
Plastics — Joining of thermoplastic moulded components — Specification of variables for thermal joining processes
60.60
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
95.99
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
90.93
Woven polypropylene sacks for bulk packaging of foodstuffs
95.99
Woven polypropylene sacks for bulk packaging of foodstuffs
90.93
Fiber reinforced plastics - cambered triangular thin wall rod - three point bending test
10.99
Rotational molded Polyethylene Water Storage Tanks
20.20
Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
95.99
Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
90.93
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
95.99
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
95.99
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments
60.60
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
95.99
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
95.99
Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments
60.60
Self adhesive tapes — Determination of peel adhesion properties
95.99
Self adhesive tapes — Determination of peel adhesion properties
90.92
Self adhesive tapes — Determination of peel adhesion properties
50.20
Self adhesive tapes — Measurement of static shear adhesion
95.99
Self adhesive tapes — Measurement of static shear adhesion
90.93
Self adhesive tapes — Measurement of breaking strength and elongation at break
95.99
Self adhesive tapes — Measurement of breaking strength and elongation at break
90.93
Adhesives for non-structural wood applications — Test method and requirements for resistance to static load
60.60
Adhesives — Wood adhesives — Determination of tensile strength of lap joints at elevated temperature (WATT '91)
60.60

No matching records found. Please try changing the filter settings.