ISO 7148-1:2012
2012-10
ISO 7148-1:2012
Résumé
1 Scope
This part of ISO 7148 specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication.
The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations, thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another.
The test results give useful information for practical application only if all parameters of influence are identical. The more the test conditions deviate from the actual application, the greater the uncertainty of the applicability of the results.
Informations générales
-
État actuel: PubliéeDate de publication: 2012-10Stade: Norme internationale à réviser [90.92]
-
Edition: 3
-
Comité technique :ISO/TC 123/SC 2ICS :21.100.10
- RSS mises à jour
Prochaine édition en cours d'élaboration
ISO/DIS 7148-1
ISO/DIS 7148-1
Paliers lisses — Essai du comportement tribologique des matériaux antifriction
Partie 1: Essai des matériaux métalliques
Cycle de vie
-
Précédemment
AnnuléeISO 7148-1:1999
-
Actuellement
PubliéeISO 7148-1:2012
Les normes ISO sont réexaminées tous les cinq ans
Stade: 90.92 (Sera révisée) -
Sera remplacée par
ProjetISO/DIS 7148-1