International Standard
ISO 2631-4:2001
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
Reference number
ISO 2631-4:2001
Версия 1
International Standard
ISO 2631-4:2001
недоступно на русском языке
Опубликовано (Версия 1, 2001)
Последний раз этот стандарт был пересмотрен в  2021. Поэтому данная версия остается актуальной.
В данный стандарт внесены 1 поправка.

ISO 2631-4:2001

ISO 2631-4:2001
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта


This part of ISO 2631 provides guidance on the application of ISO 2631-1 to the evaluation of the effects of

mechanical vibration on the comfort of passengers and crew in fixed-guideway systems. It is intended to be used

by organizations which purchase, specify or use fixed-guideway systems, to help them to understand the

relationship between the design of the guideway as well as other features of the system and the comfort of

passengers and crew. These guidelines establish methods for the evaluation of relative comfort between systems,

as opposed to absolute levels of comfort.

This part of ISO 2631 is applicable to people in normal health exposed to rectilinear vibration along their x-, y- and

z-axes, as well as rotational vibration about these (body-centred) axes. It is intended to provide guidance on the

assessment of comfort as a function of motions along and about vehicle axes that produce the body motions. This

part of ISO 2631 is not applicable to high-amplitude single transients which may cause trauma, such as those

resulting from vehicle accidents or "run-ins" produced by "longitudinal slack action", nor is it applicable to highamplitude

vibration which may affect health.

For the purposes of this part of ISO 2631, fixed-guideway passenger systems include rail systems (heavy and light

rail), magnetically levitated (MAGLEV) systems and rubber tyre metro-type systems, as well as any of the system

types listed above that incorporate a tilt capability to compensate for lateral acceleration when traversing curves.

This part of ISO 2631 provides guidance on the effects of very low-frequency accelerations (0,1 Hz to 0,5 Hz)

experienced as vertical forces that may cause kinetosis. These forces may be caused by combinations of curve

transition, super-elevation and tilt-body technology. However, this part of ISO 2631 is not intended to give guidance

on comfort implications of very low-frequency accelerations (below 0,5 Hz) experienced as lateral or longitudinal

forces. Such accelerations can be generated by guideway geometry (horizontal alignment and cant).

This part of ISO 2631 gives guidance on the evaluation of ride comfort based on motion environment only.

Общая информация

  •  : Опубликовано
     : 2001-02
    : Подтверждение действия между-народного стандарта [90.93]
  •  : 1
  • ISO/TC 108/SC 4
  • RSS обновления


Поправки принимаются, когда обнаруживается, что в существующий документ по стандартизации необходимо добавить новый материал. В них также могут быть включены редакционные или технические исправления, которые необходимо внести в существующий документ.

Amendment 1

Версия 2010

ISO 2631-4:2001/Amd 1:2010
CHF 18
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)