Ссылочный номер
ISO 13357-2:2005
© ISO 2024
ISO 13357-2:2005
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
Версия 2
2005-10
В время отменен
Отозвано (Версия 2, 2005)

Тезис

This part of ISO 13357:2005 specifies a procedure for the evaluation of the filterability of dry lubricating oils, particularly those designed for hydraulic applications. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) might not be compatible with the specified test membranes. The range of application has been evaluated with oils of viscosity up to ISO viscosity grade (VG) 100, as defined in ISO 3448. Within the range described, the filterability as defined is not dependent on the viscosity of the oil. The procedure is not suitable for some hydraulic oils on which specific properties have been conferred by the use of insoluble/partially soluble additives, or by particularly large molecular species.

ISO 13357-1 applies to the investigation the effect of water and high temperature on filterability, if an oil is used in applications where the presence of water in the oil is likely.

Общая информация

  • Текущий статус
     : Отозвано
    Дата публикации
     : 2005-10
    Этап
    : Отмена международного стандарта [95.99]
  • Версия
     : 2
  • Технический комитет :
    ISO/TC 28
    ICS :
    75.100 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 75
  6. 75.100
  7. ISO 13357-2:2005