Filter :
Standard and/or project under the direct responsibility of ISO/TC 61/SC 4 Secretariat Stage ICS
Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
95.99
Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material
95.99
Plastics — Determination of ignition temperature using a hot-air furnace
95.99
Plastics — Determination of ignition temperature using a hot-air furnace
95.99
Plastics — Determination of ignition temperature using a hot-air furnace
60.60
Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
95.99
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
95.99
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
95.99
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
90.93
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
95.99
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1
95.99
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
90.93
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
95.99
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
90.93
Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test
60.60
Plastics — Determination of flammability by oxygen index
95.99
Plastics — Smoke generation — Part 1: Guidance on optical-density testing
95.99
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1
95.99
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
90.60
Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method
95.99
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
95.99
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
95.99
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1: Specimens
95.99
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
95.99
Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame
60.60
Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
95.99
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
90.92
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens
60.60
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
20.00
Lighters — Safety specification
95.99
Lighters — Safety specifications
90.93
Plastics — Fire tests — Standard ignition sources
95.99
Plastics — Fire tests — Standard ignition sources
95.99
Plastics — Fire tests — Standard ignition sources
95.99
Plastics — Fire tests — Standard ignition sources
95.99
Plastics — Fire tests — Standard ignition sources
60.60
Plastics — Determination of the combustibility of specimens using a 125 mm flame source
95.99
Plastics — Survey of ignition sources used for national and international fire tests
95.99
Plastics — Guidance for the use of standard fire tests
95.99
Plastics — Burning behaviour — Guidance for development and use of fire tests
95.99
Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1
95.99
Plastics — Guidance for the use of standard fire tests
90.92
Plastics — Guidance for the use of standard fire tests
20.20
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance
95.99
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability
60.60
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method
95.99
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace
95.99
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
90.93
Plastics — Vertical flame spread determination for film and sheet
95.99
Plastics — Vertical flame spread determination for film and sheet
90.93
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
95.99
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
90.92
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
30.99
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
95.99
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
90.93
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
90.92
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
50.20
Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications
60.60
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
90.93
Utility lighters — General consumer-safety requirements
95.99
Utility lighters — Safety specifications
90.93
Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
30.99
Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
30.20
Plastics — Application of spread of flame test to plastic pipes
40.00
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
90.93
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
90.93
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
95.99
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
95.99
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
95.99
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
95.99

No matching records found. Please try changing the filter settings.