ISO/DIS 17650

Abstract

This document specifies a method for the determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn in low alloy steel by inductively coupled plasma atomic emission spectrometry. The method is applicable to the determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn in content range (mass fraction) as follows: Mn:0.002%~2.0%; P:0.005%~0.1%; Cr:0.003~3.0%; Ni:0.005%~4.0%; Mo:0.003%~1.0%; Co:0.002%~0.2%; Cu:0.003~0.5%; V:0.002%~0.5%; Ti:0.002%~0.5%; As:0.003%~0.1%; Sn:0.003%~0.08%

General information

Status
: Under development
Edition
: 1
Technical Committee
: ISO/TC 17/SC 1 Methods of determination of chemical composition
ICS
:
77.140.20 Stainless steels