ISO 20769-2:2018

Published (Edition 1, 2018)

This publication was last reviewed and confirmed in 2024. Therefore this version remains current.

ISO 20769-2:2018

CHF 151

Convert Swiss francs (CHF) to your currency

Abstract

This document specifies fundamental techniques of film and digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and fundamental theory of the subject.

This document applies to the radiographic examination of pipes in metallic materials for service induced flaws such as corrosion pitting, generalized corrosion and erosion. Besides its conventional meaning, "pipe" as used in this document is understood to cover other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels.

Weld inspection for typical welding process induced flaws is not covered, but weld inspection is included for corrosion/erosion type flaws.

The pipes can be insulated or not, and can be assessed where loss of material due, for example, to corrosion or erosion is suspected either internally or externally.

This document covers double wall inspection techniques for detection of wall loss, including double wall single image (DWSI) and double wall double image (DWDI).

Note that the DWDI technique described in this document is often combined with the tangential technique covered in ISO 20769-1.

This document applies to in-service double wall radiographic inspection using industrial radiographic film techniques, computed digital radiography (CR) and digital detector arrays (DDA).

General information

Status
: Published

Publication date
: 2018-09

Stage
: International Standard to be revised [90.92]
Edition
: 1

Number of pages
: 30
Technical Committee :
ISO/TC 135/SC 5

ICS :
19.100
RSS updates