International Standard
ISO 8133:2022
Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series
Reference number
ISO 8133:2022
Edition 4
2022-05
International Standard
Read sample
ISO 8133:2022
81432
Published (Edition 4, 2022)

ISO 8133:2022

ISO 8133:2022
81432
Language
Format
CHF 96
Convert Swiss francs (CHF) to your currency

Abstract

This document specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020‑2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑2, but this does not limit their application[1].

This document covers the following accessories, identified in accordance with ISO 6099:

—    AP6 — rod eye spherical, female thread (see Figure 1 and Table 1);

—    AB5 — clevis bracket, spherical eye, in angle (see Figure 2 and Table 2);

—    AA6-L — pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3);

—    AL6 — locking plate for pivot pin (see Figure 4 and Table 4);

—    AP2 — rod clevis, female thread (see Figure 5 and Table 5);

—    AP4 — rod eye plain, female thread (see Figure 6 and Table 6);

—    AB2 — eye bracket (see Figure 7 and Table 7);

—    AB4 — clevis bracket, straight (see Figure 8 and Table 8);

—    AA4-S — pivot pin, plain (split pins) (see Figure 9 and Table 9);

—    AA4-R — pivot pin, plain (rings) (see Figure 10 and Table 10);

—    AT4 — trunnion bracket (see Figure 11 and Table 11).

These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944.

This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

 

[1]   1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2

General information

  •  : Published
     : 2022-05
    : International Standard to be revised [90.92]
  •  : 4
     : 14
  • ISO/TC 131/SC 3
    23.100.20 
  • RSS updates

Got a question?

Check out our FAQs

Customer care
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)