ISO/WD 15373

Deleted

A working group has prepared a draft.

Will replace ISO 15373:2001

Abstract

This International Standard describes two methods for the determination of free formaldehyde (HCHO) in polymer

dispersions. The procedure has been evaluated using acrylic, acrylonitrile butadiene, carboxylated styrenebutadiene

and vinyl acetate polymer dispersions. Both test methods may also be applicable to polymer dispersions

of other compositions.

Method A is the preferred method for polymer dispersions with a free-formaldehyde content higher than .

Method B is recommended if lower formaldehyde contents have to be determined or arbitration analyses have to be

carried out.

Both methods minimize changes in free-formaldehyde concentration that can result from changes in the physical or

chemical properties of polymer dispersions.

There are no known limitations to these methods when used in the manner described.

Check out our FAQs

Customer care

+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)