Numéro de référence
ISO 10414-2:2002
ISO 10414-2:2002
Industries du pétrole et du gaz naturel — Essais in situ des fluides de forage — Partie 2: Fluides à base d'huiles
Edition 1
2002-07
Annulée
ISO 10414-2:2002
33019
Annulée (Edition 1, 2002)

Résumé

ISO 10414-2:2002 provides standard procedures for determining the following characteristics of oil-based drilling fluids:

  1. drilling fluid density (mud weight);
  2. viscosity and gel strength;
  3. filtration;
  4. oil, water and solids contents;
  5. alkalinity, chloride content and calcium content;
  6. electrical stability;
  7. lime and calcium contents, calcium chloride and sodium chloride contents;
  8. low-gravity solids and weighting material contents.

Additional test methods are given that may optionally be used for the determination of

  1. shear strength,
  2. oil and water contents from cuttings,
  3. drilling fluid activity,
  4. aniline point,
  5. cuttings activity,
  6. active sulfides.

Procedures are also provided that may optionally be used for

  1. sampling, inspection and rejection,
  2. rig-site sampling,
  3. calibration and verification of glassware, thermometers, viscometers, retort kit cups and drilling fluid balances.

Examples of calculations are given for lime, salinity and solids content.

Informations générales

  •  : Annulée
     : 2002-07
    : Annulation de la Norme internationale [95.99]
  •  : 1
  • ISO/TC 67/SC 3
    75.180.10 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance